Industries Case Study 4

All Case Studies

CFD Analysis of ESP

CFD simulation of electrostatic precipitator to optimize flow uniformity and maximize performance & life.

CFD Analysis of Vaporizer

CFD Analysis is a process used to investigate the dynamics of heat transfer in vaporizers through the modelling of conduction and convection modes.

CFD Analysis of Wind Driven Rain on Building Facade

CFD can be used to simulate wind- driven rain and its effects on building façade, enabling preventive measures to be taken at the construction stage.

CFD Analysis of Swing Check Vlave

CFD is used to determine the opening position of a Swing Check Valve disc during steady state operating condition by calculating the torque acting on

CFD Analysis of Engine Air Intake Precleaner

CFD is used to analyze the dust separation performance of Pre-cleaners in Engine Air Intake systems.

CFD Analysis of Blower

CFD is used to accurately simulate air flow in a Multistage Centrifugal Blower and predict its performance.

CFD Analysis of Fin Mounted on Hull

CFD simulations can be used to calculate the forces and moments acting on a fin when mounted on a hull, aiding in the design process.

CFD Analysis of Cyclone Dust Collector

CFD is used to accurately determine the back pressure, particle separation efficiency and velocity profile in cyclone separators, which are important in the mineral and

CFD Analysis of HRSG Unit

CFD is used for improving the performance of an HRSG unit by identifying and correcting flow uniformity issues and flow leakages.

CFD Analysis of Car Battery

CFD is used to design an efficient Multi-Port-Extrusion to enable maximum heat transfer rate between Cells & Coolant for efficient cooling of Batteries present in

CFD Analysis of Heat Exchanger

CFD can help to optimize the Heat Exchanger design for improved heat transfer performance.

CFD Analysis of Canopy

CFD helps in understanding the flow and thermal characteristics of complex canopy systems, which helps improve the efficiency of components inside.

CFD Analysis of Horizontal Pump Sump

CFD helps to analyze and improve sump performance by simulating the complexities within it.

CFD Analysis of Vertical Pump Sump

CFD helps in understanding and improving the performance of sump systems by simulating all their complexities.

CFD Analysis of Electronics System

CFD is used to predict and eliminate hot spots in Electronic System designs to ensure efficient cooling and optimal performance.

Outdoor Units (ODU) HVAC

CFD can be used to evaluate the performance of ODUs in high-rise buildings, accounting for seasonal variation in wind flow direction and stack/buoyancy effects.

Shelter HVAC

CFD can be used to design an efficient cooling system for a shelter and determine the temperature within its Units during operation.

Data Center HVAC

CFD can be used to predict and eliminate hot spots in data centers by simulating airflow and heat transfer to ensure efficient cooling.

Airport HVAC

CFD Analysis can be used to simulate airflow and temperature patterns to optimize the HVAC system for efficient cooling in airports.

Car Park Ventilation HVAC

CFD analysis of Car Park is used to determine the number and location of jet fans in car parks for efficient ventilation and smoke removal

FEA of Quick Opening Closure

ANALYZER was approached by process equipment manufacturers to evaluate the design of their newly developed QOC’s using simulation techniques and provide solutions in case of

FEA of Chassis

Analyzer has provided advanced FEM simulations to leading Automobile OEMs for static and dynamic analysis of chassis designs for improved reliability, cost-efficiency and safety.

Thermal Analysis of Valve

FEA can be used to conduct static and transient thermal analysis and the FSI approach is used to solve more complex problems in order to

FEA of Ball Mill

Analyzer provided FEA services to evaluate the design of a Ball-Mill to multiple static and fatigue loadings, optimizing thickness and preventing fatigue failure.

PSD Analysis Case Shelter

Analyzer assisted a shelter manufacturer in India to evaluate the design of their new shelter assembly against various loading conditions using PSD analysis in ANSYS.

FEA of Pumps

ANALYZER was approached to evaluate the design of a newly developed pump assembly for a nuclear power plant to ensure its reliability according to the

Torsional Vibration Analysis

TVA of the complete drive train to check the torsional resonance and stresses induced on the shaft.

FEA of Shelters

Military shelters subjected to various loadings and design modifications are suggested to improve the design.

Model Analysis of Structure

To determine the natural frequency and check if any major natural frequency is close to the operating frequency as per API.

Harmonic Responce Analysis of Structure

To determine the reason for the crack and avoid failure due to fatigue load on the vessel.

Buckling Analysis of Structure

Buckling analysis of a large central tube due to thermal and mechanical compressive load.

Elastic Plastic Stress Analysis

Elastic-plastic analysis on a transition duct from circular to rectangular with various stiffness

Thermal Analysis of Heat Exchanger

FEA of Shell & Tube heat exchanger for both thermal ana mechanical loads as per UHX 13.4

FEA of Expansion Joint of Heat Exchanger

FEA of Expansion joint for various load cases as per TEMA 9th and 10th edition

FEA of Air-Cooled Heat Exchanger

FEA of rectangular header heat exchanger due to internal pressure considering all the tube

FEA of Heat Exchanger

To determine the stresses at flexiable tubesheet due to mechanical and thermal loads

FEA of SKIRT

(Y-FORGING) JUNCTION (To determine the stresses at the Y-forging due to various loads

Lifting Analysis of Pressure Vessel

Lifting analysis of pressure vessels for various orentations to determine the stresses at the lifting lug and skirt to shell junction.

Fatigue Analysis of Pressure Vessel

Fatigue life evaluation of the vessel for thermo-mechanical fluctuating loads as per ASME Annexture 3F.

FEA of Complete Pressure Vessel

Considering all the nozzles on the vessel and creating a hex mesh to capture the induced stresses due to thermo-mechanical loads

FEA OF NOZZLE TO SHELL JUNCTION

Tangential or inclined nozzle FEA to determine the stresses at the nozzle to shell junction which are not covered in WRC.

Aerospace

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Industries Case Study 4

All Case Studies

Aerospace

Automotive

Aerospace

Aerospace

Automotive

Aerospace

Contact Form