CASE STUDIES

March 21, 2023

FEA Aerospace engineering of Engine

the total pressure drop (back pressure) across the Precleaner within critical limit. CFD helps in understanding the trajectories of various sizes of dust particles within Precleaner and it also helps in determining the dust separation ability of Precleaner.
March 21, 2023

Aerospace Engine Air Intake

the total pressure drop (back pressure) across the Precleaner within critical limit. CFD helps in understanding the trajectories of various sizes of dust particles within Precleaner and it also helps in determining the dust separation ability of Precleaner.
March 21, 2023

FEA Aerospace engineering of Engine

Precleaner is used in Engine Air Intake system for supplying cleaned air to the combustion chamber by separating dust particles. It is very important that Precleaner should separate out maximum dust particles from the fresh air before it enters combustion chamber by keeping the total pressure drop (back pressure) across the Precleaner within critical limit. CFD helps in understanding the trajectories of various sizes of dust particles within Precleaner and it also helps in determining the dust separation ability of Precleaner.
March 14, 2023

CFD Simulation of Car Park Ventilation

CASE STUDY HIGHLIGHTS Introduction Traditional car park has ducted system for ventilation, these systems are quite in-efficient as they cater to the complete car park area […]
February 25, 2020

CFD Analysis of Wind Driven Rain on Building Facade

INTRODUCTION Wind Driven Rain (WDR) occurs when wind and rain both occur simultaneously. It is very important to study the effect of WDR on building façade […]
February 25, 2020

CFD Analysis of Engine Air Intake Pre-Cleaner

INTRODUCTION Precleaner is used in Engine Air Intake system for supplying cleaned air to the combustion chamber by separating dust particles. It is very important that […]
February 25, 2020

THREE STAGE BLOWER

INTRODUCTION Multistage centrifugal Blower consist of stators & rotors. CFD is widely used to determine the performance curves of Blower and to identify the flow separation […]
February 25, 2020

CFD ANALYSIS OF ELECTROSTATIC PRECIPITATOR (ESP)

INTRODUCTION Electrostatic precipitator (ESP) contains set of positively charged plates which are placed in parallel in the path of particulate emission. ESP also contains GD screens […]
February 25, 2020

CFD Analysis of Fin Mounted on Hull

INTRODUCTION Fin mounted on Hull is very important component of ship, which helps in maneuvering the ship in particular direction. It is very important to calculate […]
February 25, 2020

CFD Analysis of Cyclone Dust Collector

INTRODUCTION Cyclone separators are used extensively to classify mineral slurries with a size or density distribution in the mineral and coal industries. In Cyclone it is […]